RockJocks Johnny Joint(R) adjustable front trac bar for the TJ/XJ/LJ/MJ features an offset Johnny Joint(R) rod end that puts the bar further forward providing more clearance between the diff and the trac bar. Other features include 1 1/4 in. x .250 wall 4130 chrome moly construction, a welded in gusset from the bar to the Johnny Joint(R), heavy duty adjustor end with with bushing and steel insert sleeve that bolt into the factory housing bracket, and semi-gloss black powder coat finish. Some drilling is required for installation. The supplied frame bolt is a 5/8 in. and this hole must be drilled to size to accommodate the heavier duty bolt. NOTE: This trac bar is intended to be used with a minimum of 2 in. of lift. It may work on vehicles with less lift with Dana 30 frontends, however, on vehicles with no lift and a Dana 44, 9 in. or 60 frontend, you may run into a clearance issue. Always check fitment before drilling!
Johnny Joint? Trac Bar; Chrome Moly; Adjustable; Some Drilling Required; Reuses Stock Housing Bolt;
