EBC 93-94 Eagle Talon 1.8 Redstuff Rear Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent. DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty 93 thru 94 MITSUBISHI Eclipse 4WD 2.0 Turbo (D27A) Fitment 1990 Eagle Talon Base 1990 Eagle Talon TSi 1990 Mitsubishi Eclipse Base 1990 Mitsubishi Eclipse GS 1990 Mitsubishi Eclipse GST 1990 Mitsubishi Eclipse GSX 1990 Mitsubishi Galant Base 1990 Mitsubishi Galant GS 1990 Mitsubishi Galant GSX 1990 Mitsubishi Galant LS 1990 Plymouth Laser Base 1990 Plymouth Laser RS 1991 Eagle Talon Base 1991 Eagle Talon TSi 1991 Mitsubishi Eclipse Base 1991 Mitsubishi Eclipse GS 1991 Mitsubishi Eclipse GST 1991 Mitsubishi Eclipse GSX 1991 Mitsubishi Galant Base 1991 Mitsubishi Galant GS 1991 Mitsubishi Galant GSR 1991 Mitsubishi Galant GSX 1991 Mitsubishi Galant LS 1991 Mitsubishi Galant VR-4 1991 Plymouth Laser Base 1991 Plymouth Laser RS 1992 Eagle Talon Base 1992 Eagle Talon TSi 1992 Mitsubishi Eclipse Base 1992 Mitsubishi Eclipse GS 1992 Mitsubishi Eclipse GST 1992 Mitsubishi Eclipse GSX 1992 Mitsubishi Galant Base 1992 Mitsubishi Galant GS 1992 Mitsubishi Galant GSR 1992 Mitsubishi Galant GSX 1992 Mitsubishi Galant LS 1992 Mitsubishi Galant VR-4 1992 Plymouth Colt Base 1992 Plymouth Colt GL 1992 Plymouth Colt Vista 1992 Plymouth Colt Vista SE 1992 Plymouth Laser Base 1992 Plymouth Laser RS 1993 Eagle Talon DL 1993 Eagle Talon ES 1993 Eagle Talon TSi 1993 Mitsubishi Eclipse Base 1993 Mitsubishi Eclipse GS 1993 Mitsubishi Eclipse GST 1993 Mitsubishi Eclipse GSX 1993 Mitsubishi Galant ES 1993 Mitsubishi Galant LS 1993 Mitsubishi Galant S 1993 Plymouth Laser Base 1993 Plymouth Laser RS 1994 Eagle Talon DL 1994 Eagle Talon ES 1994 Eagle Talon TSi 1994 Mitsubishi Eclipse Base 1994 Mitsubishi Eclipse GS 1994 Mitsubishi Eclipse GST 1994 Mitsubishi Eclipse GSX 1994 Mitsubishi Galant ES 1994 Mitsubishi Galant GS 1994 Mitsubishi Galant LS 1994 Mitsubishi Galant S 1994 Plymouth Laser Base 1994 Plymouth Laser RS