EBC 91-97 Infiniti G20 2.0 Redstuff Front Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent. DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty 96 thru 98 NISSAN 240SX 2.4 (ABS) (5 Lug) Fitment 1989 Nissan 240SX SE 1989 Nissan 240SX XE 1990 Nissan 240SX SE 1990 Nissan 240SX XE 1990 Nissan Stanza GXE 1990 Nissan Stanza XE 1991 Infiniti G20 Base 1991 Nissan 240SX Base 1991 Nissan 240SX LE 1991 Nissan 240SX SE 1991 Nissan Stanza GXE 1991 Nissan Stanza XE 1992 Infiniti G20 Base 1992 Nissan 240SX Base 1992 Nissan 240SX LE 1992 Nissan 240SX SE 1992 Nissan Stanza GXE 1992 Nissan Stanza SE 1992 Nissan Stanza XE 1993 Infiniti G20 Base 1993 Nissan 240SX Base 1993 Nissan 240SX SE 1994 Infiniti G20 Base 1994 Infiniti G20 T 1995 Infiniti G20 Base 1995 Infiniti G20 T 1996 Infiniti G20 Base 1996 Infiniti G20 T 1996 Nissan 240SX Base 1996 Nissan 240SX SE 1997 Nissan 240SX Base 1997 Nissan 240SX LE 1997 Nissan 240SX SE 1998 Nissan 240SX Base 1998 Nissan 240SX LE 1998 Nissan 240SX SE 2000 Nissan Sentra GXE 2000 Nissan Sentra SE 2000 Nissan Sentra XE 2001 Nissan Sentra CA 2001 Nissan Sentra GXE 2001 Nissan Sentra SE 2001 Nissan Sentra XE 2002 Nissan Sentra CA 2002 Nissan Sentra GXE 2002 Nissan Sentra SE-R 2002 Nissan Sentra SE-R Spec V 2002 Nissan Sentra XE 2003 Nissan Sentra GXE 2003 Nissan Sentra Limited Edition 2003 Nissan Sentra SE-R 2003 Nissan Sentra SE-R Spec V 2003 Nissan Sentra XE 2004 Nissan Sentra Base 2004 Nissan Sentra S 2004 Nissan Sentra SE-R 2004 Nissan Sentra SE-R Spec V 2005 Nissan Sentra Base 2005 Nissan Sentra S 2005 Nissan Sentra SE-R 2005 Nissan Sentra SE-R Spec V 2006 Nissan Sentra Base 2006 Nissan Sentra S 2006 Nissan Sentra SE-R 2006 Nissan Sentra SE-R Spec V