EBC 05-08 Audi A4 2.0 Turbo Redstuff Front Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent. DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty 2007 thru 2010 AUDI A4 Cabriolet quattro 2.0 Turbo Fitment 2004 Audi S4 Avant 2004 Audi S4 Base 2004 Audi S4 Cabriolet 2005 Audi A4 Base 2005 Audi A4 Cabriolet 2005 Audi A4 Quattro Avant 2005 Audi A4 Quattro Base 2005 Audi A4 Quattro Cabriolet 2005 Audi A6 Quattro Base 2005 Audi S4 Avant 2005 Audi S4 Base 2005 Audi S4 Cabriolet 2006 Audi A4 Base 2006 Audi A4 Cabriolet 2006 Audi A4 Quattro Avant 2006 Audi A4 Quattro Base 2006 Audi A4 Quattro Cabriolet 2006 Audi A6 Base 2006 Audi A6 Quattro Avant 2006 Audi A6 Quattro Base 2006 Audi S4 Avant 2006 Audi S4 Base 2006 Audi S4 Cabriolet 2007 Audi A4 Base 2007 Audi A4 Cabriolet 2007 Audi A4 Quattro Avant 2007 Audi A4 Quattro Base 2007 Audi A4 Quattro Cabriolet 2007 Audi A6 Base 2007 Audi A6 Quattro Avant 2007 Audi A6 Quattro Base 2007 Audi S4 Avant 2007 Audi S4 Base 2007 Audi S4 Cabriolet 2008 Audi A4 Base 2008 Audi A4 Cabriolet 2008 Audi A4 Quattro Avant 2008 Audi A4 Quattro Base 2008 Audi A4 Quattro Cabriolet 2008 Audi A6 Base 2008 Audi A6 Quattro Avant 2008 Audi A6 Quattro Base 2008 Audi S4 Avant 2008 Audi S4 Base 2008 Audi S4 Cabriolet 2009 Audi A4 Base 2009 Audi A4 Cabriolet 2009 Audi A4 Quattro Avant 2009 Audi A4 Quattro Base 2009 Audi A4 Quattro Cabriolet 2009 Audi A6 Base 2009 Audi A6 Quattro Avant 2009 Audi A6 Quattro Base 2009 Audi S4 Cabriolet 2010 Audi A4 Base 2010 Audi A4 Quattro Avant 2010 Audi A4 Quattro Base 2010 Audi A6 Base 2010 Audi A6 Quattro Avant 2010 Audi A6 Quattro Base 2011 Audi A6 Base 2011 Audi A6 Quattro Avant 2011 Audi A6 Quattro Base 2015 Audi TTS Quattro Base