EBC 04-06 Saab 9-2X 2.0 Turbo Redstuff Rear Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent. DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty 2003 thru 2008 SUBARU Forester (SG) 2.5 Turbo Fitment 2003 Subaru Forester X 2003 Subaru Forester XS 2003 Subaru Impreza Outback 2003 Subaru Impreza RS 2003 Subaru Impreza TS 2003 Subaru Impreza WRX 2004 Subaru Forester X 2004 Subaru Forester XS 2004 Subaru Forester XT 2004 Subaru Impreza Outback 2004 Subaru Impreza RS 2004 Subaru Impreza TS 2004 Subaru Impreza WRX 2004 Subaru Impreza WRX STI 2005 Saab 9-2X Aero 2005 Saab 9-2X Linear 2005 Subaru Forester X 2005 Subaru Forester XS 2005 Subaru Forester XS L.L. Bean Edition 2005 Subaru Forester XT 2005 Subaru Forester XT Premium 2005 Subaru Impreza Outback Sport 2005 Subaru Impreza RS 2005 Subaru Impreza WRX 2005 Subaru Impreza WRX STI 2006 Saab 9-2X 2.5i 2006 Saab 9-2X Aero 2006 Subaru Forester X 2006 Subaru Forester X L.L. Bean Edition 2006 Subaru Forester XT Limited 2006 Subaru Impreza 2.5i 2006 Subaru Impreza Outback Sport 2006 Subaru Impreza WRX 2006 Subaru Impreza WRX Limited 2006 Subaru Impreza WRX STI 2006 Subaru Impreza WRX TR 2007 Subaru Forester X 2007 Subaru Forester X L.L. Bean Edition 2007 Subaru Forester XT Limited 2007 Subaru Impreza 2.5i 2007 Subaru Impreza Outback Sport 2007 Subaru Impreza WRX 2007 Subaru Impreza WRX Limited 2007 Subaru Impreza WRX STI 2007 Subaru Impreza WRX STI Limited 2007 Subaru Impreza WRX TR 2008 Subaru Forester Sports 2.5 X 2008 Subaru Forester Sports 2.5 XT 2008 Subaru Forester X 2008 Subaru Forester X L.L. Bean Edition 2008 Subaru Forester XT Limited