EBC 01-03 Acura CL 3.2 Redstuff Rear Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation. Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent. DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty 2004 thru 2008 ACURA TL 3.2 (Manual)(Brembo) Fitment 1991 Acura Legend Base 1991 Acura Legend L 1991 Acura Legend LS 1992 Acura Legend Base 1992 Acura Legend L 1992 Acura Legend LS 1993 Acura Legend Base 1993 Acura Legend L 1993 Acura Legend LS 1994 Acura Legend GS 1994 Acura Legend L 1994 Acura Legend LS 1995 Acura Legend GS 1995 Acura Legend L 1995 Acura Legend LS 1995 Acura Legend SE 1996 Acura RL Base 1996 Acura RL Premium 1997 Acura RL Base 1997 Acura RL Premium 1998 Acura RL Base 1998 Acura RL Premium 1998 Acura RL SE 1999 Acura RL Premium 1999 Acura SLX Premium 1999 Acura TL Base 2000 Acura RL Premium 2000 Acura TL Base 2001 Acura CL Premium 2001 Acura CL Type-S 2001 Acura RL Premium 2001 Acura TL Base 2002 Acura CL Base 2002 Acura CL Type-S 2002 Acura RL Premium 2002 Acura TL Base 2002 Acura TL Type-S 2003 Acura CL Base 2003 Acura CL Type-S 2003 Acura RL Premium 2003 Acura TL Base 2003 Acura TL Type-S 2004 Acura RL Premium 2004 Acura TL Base 2005 Acura TL Base 2006 Acura TL Base 2007 Acura RDX Base 2007 Acura TL Base 2007 Acura TL Type-S 2008 Acura RDX Base 2008 Acura TL Base 2008 Acura TL Type-S 2009 Acura RDX Base